Danh mục sản phẩm

Chi tiết sản phẩm

8-Port Gigabit + 2-Port Gigabit SFP Smart Switch CISCO CBS220-8T-E-2G

Mã sản phẩm: CBS220-8T-E-2G

8-Port Gigabit + 2-Port Gigabit SFP Smart Switch CISCO CBS220-8T-E-2G

Bảo hành: Nhà sản xuất

Tình trạng: Còn hàng

3,372,000 VNĐ

- Support 8 10/100/1000 ports + 2 Gigabit SFP.

- LEDs: System, Link/Act, Speed.

- Flash: 64MB.

- CPU memory: 256MB.

- MAC table: Up to 8.192 Media Access Control (MAC) addresses.

- Jumbo frame: Frame sizes up to 9.216 supported.

- Dimensions (W x D x H): 279 x 170 x 44 mm.

- Weight: 1.16kg.

- Power: 100-240V, 50-60Hz, Internal.


Thông số kỹ thuật

Switching capacityForwarding rate in millions of packets per second (mpps; 64-byte packets): 14.88
Switching capacity in Gigabits per second (Gbps): 20
Layer 2 switching
MAC tableUp to 8,192 Media Access Control (MAC) addresses
Spanning Tree Protocol (STP)Standard 802.1d Spanning Tree support, enabled by default
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])
Multiple Spanning Tree instances using 802.1s (MSTP)
16 instances are supported
Port groupingSupport for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
+ Up to 8 groups
+ Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
Load balance based on source and destination MAC address, or source and destination MAC/IP
VLANSupport for up to 256 Virtual Local Area Networks (VLANs) simultaneously
Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Auto voice VLANVoice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
QinQ VLANVLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)Protocols for automatically propagating and configuring VLANs in a bridged domain
Head-of-Line (HOL) blockingHOL blocking prevention
Jumbo frameFrame sizes up to 9,216 supported
Loopback detectionLoopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.
Automatic Media-Dependent Interface Crossover (MDIX)Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.
ACLsDrop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol (TCP)/ User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, TCP flag
Support up to 512 rules
Port securityCreates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses
IEEE 802.1X (authenticator role)802.1X: Remote Authentication Dial-in User Service (RADIUS) authentication; guest VLAN;
Single-host, multiple-host, and multisession mode
RADIUS, TACACS+Supports RADIUS and Terminal Access Controller Access Control System (TACACS) authentication; switch functions as a client
MAC address filteringSupported
Storm controlBroadcast, multicast, and unknown unicast
DoS protectionDOS attack prevention
STP Bridge Protocol Data Unit (BPDU) GuardThis security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port.
Spanning Tree Loop GuardThis feature provides additional protection against Layer 2 forwarding loops (STP loops).
Secure Shell (SSH) ProtocolSSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported.
Secure Sockets Layer (SSL)SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
Priority levels8 hardware queues per port
SchedulingStrict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)
Class of servicePort-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
Rate limitingIngress policer; egress shaping and rate control; per VLAN, per port, and flow-based
Congestion avoidanceA TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization
Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 SnoopingIGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
IGMP querierIGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, Request for Comments (RFC) 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416
IPv6IPv6 host mode
IPv6 over Ethernet
IPv6/IPv4 Dual Stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
ICMP version 6
IPv6 ACLDrop or rate limit IPv6 packets in hardware
IPv6 QoSPrioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD v1/2) SnoopingDeliver IPv6 multicast packets only to the required receivers
IPv6 applicationsWeb/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP)
IPv6 Requests for Comments (RFCs) supportedRFC 4443 (which obsoletes RFC2463) - ICMP version 6
RFC 4291 (which obsoletes RFC 3513) - IPv6 address architecture
RFC 4291 - IPv6 addressing architecture
RFC 2460 - IPv6 specification
RFC 4861 (which obsoletes RFC 2461) - Neighbor discovery for IPv6
RFC 4862 (which obsoletes RFC 2462) - IPv6 stateless address auto-configuration
RFC 1981 - Path MTU discovery
RFC 4007 - IPv6 scoped address architecture
RFC 3484 - Default address selection mechanism
Cisco Business DashboardSupport direct management with Cisco Business Dashboard and mobile app. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site.
Cisco Business mobile appMobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips.
Cisco Network Plug and Play (PnP) agentThe Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a zero touch deployment experience.
Supports Cisco PnP Connect
Web user interfaceBuilt-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring
Text-editable config filesConfig files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
Command-line interfaceScriptable CLI; a full CLI is supported. User privilege levels 1 and 15 are supported for the CLI
SNMPSimple Management Network Protocol (SNMP) versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM)
Remote Monitoring (RMON)Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stackCoexistence of both protocol stacks to ease migration
Port mirroringTraffic on a port or VLAN can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Four sessions are supported.
Firmware upgradeWeb browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP)
Dual images for resilient firmware upgrades
DHCP (Option 12, 66, 67, 82, 129, and 150)DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download), DHCP relay, and hostname
Time synchronizationSimple Network Time Protocol (SNTP)
Login bannerConfigurable multiple banners for web as well as CLI
Other managementHTTP/HTTPS; TFTP upgrade; DHCP client; Bootstrap Protocol (BOOTP); cable diagnostics; ping; traceroute; syslog
BonjourThe switch advertises itself using the Bonjour protocol
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED ExtensionsLLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones.
Cisco Discovery ProtocolThe switch advertises itself using the Cisco Discovery Protocol. Displays brief information for connected Cisco network devices, IP phones, and wireless access points
Power efficiency
EEE compliance (802.3az)Support 802.3az Energy Efficient Ethernet on all ports; substantially reduce the power consumption when link bandwidth is not at full utilization
Energy DetectAutomatically turns power off on Gigabit Ethernet and 10/100 RJ-45 ports when detecting a link down
Active mode is resumed without loss of any packets when the switch detects the link up
Disable port LEDsLEDs can be manually turned off to save on energy
Time-based PoEPoE power can be on or off based on user-defined schedule to save energy
Time-based port operationLink up or down based on user-defined schedule (when the port is administratively up)
ButtonsReset button
Cabling typeUnshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5
Ethernet or better for 1000BASE-T
LEDsSystem, Link/Act, Speed
Flash64 MB
CPU memory256 MB
PortsTotal system ports: 10 Gigabit Ethernet
RJ-45 ports: 8 Gigabit Ethernet
Uplink ports: 2 Gigabit Ethernet Small form-factor pluggable (SFP)
Packet Buffer4.1 Mb
Unit dimensions (W x D x H)279 x 170 x 44 mm
Unit weight1.16 kg
Power100-240 V, 50-60 Hz, External
CertificationsUL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, C-tick
Operating temperature0-50° C
Storage temperature-20° C to +70° C
Operating humidity10% to 90%, relative, noncondensing
Storage humidity10% to 90%, relative, noncondensing
Power ConsumptionSystem power consumption:
Heat dissipation (BTU/hr): 20.13
Acoustic Noise and Mean Time Between Failure (MTBF)Fan (number): Fanless
MTBF @ 25°C (hours):  1,489,560


Sản phẩm cùng loại


8-port Gigabit Ethernet Unmanaged Switch CISCO CBS110-8T-D-EU


8 ports 10/100 Managed Switch CISCO SF352-08-K9-EU


8-Port Gigabit Ethernet PoE Unmanaged Switch CISCO CBS110-8PP-D-EU


48-Port Gigabit Ethernet + 4-Port 10G SFP+ PoE Managed Switch CISCO CBS350-48P-4X-EU


16-port 10/100/1000 Ethernet + 2-port 1G SFP Uplinks Switch Cisco C1000-16P-2G-L


8-Port Gigabit Ethernet PoE Switch CISCO C1000-8P-2G-L


Thông Tin Doanh Nghiệp

Điện thoại : 0932 035 989
Mã số thuế : 0315812661
Email     : kinhdoanh@thongminhso.com
Địa chỉ 383/50/1 Lê Đức Thọ, Phường 17, Quận Gò Vấp, Thành phố Hồ Chí Minh, Việt Nam

Kết nối với chúng tôi

Copyright © 2016. All rights reserved by Quoc An